Pneumatic Bristle Blaster

The Industrial Duty Pneumatic Metal Blaster is constructed with individually strengthened components and can be used for intensive and continuous daily use. The MBX Metal Blaster is built to optimize the performance of the MBX belts and vinyl eraser. 

The high output rpm of the drive unit is reduced to provide high torque, resulting in efficient performance and safe operation. The in-line design allows for increased control, flexibility and access during surface preparation tasks.

 

MBX Pneumatic Industrial Kit Set consisting of:

•    1 drive unit Bristle Blaster Industrial Pneumatic

•    1 Adaptor System 23mm 

•    1 Adaptor System 11mm

•    1 Accelerator Bar 23mm 

•    1 Accelerator Bar 11mm 

•    1 Air Pressure Regulator for 23mm-Belts 

•    1 Air Pressure Regulator for 11mm-Belts 

•    5 Bristle Blaster Belts, red, 23mm 

•    5 Bristle Blaster Belts, red, 11mm

Packed in a blow mould case.

The Bristle Blaster Industrial Pneumatic is an IN-LINE drive unit, which is distinguished by patented innovations.

•    The patented air cooling system increases the service life of the flexible Bristle Blaster belts

•    The patented Accelerator bar is the basis for achieving roughness on steel or stainless steel and other materials (40- 120 µm) as well as surface cleanness according to DIN EN ISO 8501-1 SA 2.5 / SA 3, as achieved by conventional grit blasting.

The special designed gear reduction increases the torque at 2,300 rpm. The low operating speed of 2,300 rpm and the light construction (1.2 kg) ensure a high degree work safety and easy, flexible handling. The IN-LINE design of the Bristle Blaster Industrial Pneumatic allows the highest possible efficient operation in difficult to reach areas and in places where blasting is not possible, is not allowed or is not economical.

Technical data for the drive unit:

Weight:	1,2 kg
Air pressure connection thread:	Rp 1/4"
Required hose diameter:	3/8" ID (9,5 mm)
Rotational speed:	0-3500 min-1
Required flow pressure:	6,2 bar/90 psi
Average air consumption:	17,5 CFM (0,5 m3/min.)
Vibration:	2 m/sec2 (EN ISO 8662-1; 8662-4)
Sound pressure level:	83 dB (DIN 45635-21; ISO 3744)